Dremel tool question

Discuss caving lights, packs, helmets, clothing, etc.
For rope and vertical equipment, go to the On Rope! forum.
Cave electronics enthusiasts can also visit the Communications and Electronics Section forum.

Moderator: Moderators

Dremel tool question

Postby Dangerjudy » Dec 13, 2007 1:13 pm

I need to do the dremel tool mods to my Apex light and figure I'll go ahead and get one for myself as a Christmas gift. What model and tool kit do y'all recommend getting? Are the cordless ones lame or worth it, and do I need multi-speed?
User avatar
Dangerjudy
NSS Hall Of Fame Poster
 
Posts: 248
Joined: Sep 5, 2005 4:58 pm
NSS #: 49720
Primary Grotto Affiliation: Birmingham Grotto
  

Postby Scott McCrea » Dec 13, 2007 1:57 pm

I have a cheapo, corded Craftsman rotary tool (Dremel knock-off). I've used the heck out if it for the past 6 years. I use the multi-speed function occasionally, but 95 percent of the time it's on full blast. That said, I think multi-speed is a worthwhile option. The bits are another issue. I buy them individually or bulk packs of the same bit. Those giant variety packs with 214 pieces look like a great deal, but they are not. I got one for Xmas a few years ago. The case is huge! I chucked the case and the pieces that were worthless and condensed the rest into a little drawer. I use the bullet shaped grinding stone and the cut-off tool for almost everything.

The cordless option would be nice, I think.
Scott McCrea
SWAYGO
User avatar
Scott McCrea
Global Moderator
 
Posts: 3198
Joined: Sep 5, 2005 3:07 pm
Location: Asheville, NC USA
NSS #: 40839RL
Primary Grotto Affiliation: Flittermouse Grotto
  

Postby Phil Winkler » Dec 13, 2007 2:15 pm

I doubt the cordless option would give you enough torque and longevity. The multi speed option is very useful when you first start. At high speed you can take a lot of material off real fast. I agree with Scott to just buy the bits you need/use routinely.
Phil Winkler
13627 FE
User avatar
Phil Winkler
Global Moderator
 
Posts: 2375
Joined: Sep 5, 2005 8:48 am
Location: Wilmington, DE and Dewey Beach
NSS #: 13627FE
  

Postby NZcaver » Dec 13, 2007 2:49 pm

Actually, I've had a 2-speed cordless cheap-ish Black and Decker Wizard for probably about 6 years now - and it's lasted really well. Plenty of torque for engraving, light grinding work, etc, and surprisingly good battery life too.
User avatar
NZcaver
Global Moderator
 
Posts: 6367
Joined: Sep 7, 2005 2:05 am
Location: Anchorage, Alaska
Name: Jansen
NSS #: 50665RL
  

Postby ian mckenzie » Dec 14, 2007 2:53 pm

I got an authentic Dremel as a gift, but I should think that the cheaper knockoffs are just as good - after all. it's just a motor in a handle that makes the end go round and round... I buy the cheap non-Dremel cutoff wheels by the barrelful; that's what I use most and they typically only last thru a single useage each. It's a versatile tool, and a great Christmas gift!
User avatar
ian mckenzie
NSS Hall Of Fame Poster
 
Posts: 549
Joined: Sep 16, 2005 9:40 am
Location: Crowsnest Pass, Canada
Primary Grotto Affiliation: Alberta Speleological Society
  

Postby ian mckenzie » Dec 14, 2007 2:56 pm

DJ, is that a tuxedo cat in your new avatar? We've got one too...
User avatar
ian mckenzie
NSS Hall Of Fame Poster
 
Posts: 549
Joined: Sep 16, 2005 9:40 am
Location: Crowsnest Pass, Canada
Primary Grotto Affiliation: Alberta Speleological Society
  

Postby Dangerjudy » Dec 14, 2007 3:11 pm

Yep, it's my friend Kathy's cat Tessa. However I have two tuxedo cats of my own - Clare and Luna, sisters.
I just like the Tessa kitty pic because she got in the wastepaper basket. Tessa is small sized.

Tuxedo cats are my preferred model. I have had three now and find them a reliable kind of cat for mischief.
Birmingham Grotto, NSS 49720. "I reserve the right to be ridiculous." bono
User avatar
Dangerjudy
NSS Hall Of Fame Poster
 
Posts: 248
Joined: Sep 5, 2005 4:58 pm
NSS #: 49720
Primary Grotto Affiliation: Birmingham Grotto
  

Postby Komebeaux » Dec 14, 2007 3:13 pm

I got a corded Dremel for Christmas years ago. It has two speeds, 'Holy S***! That's Fast!' and 'Stop'. I opened a coconut with it once. I think that's the only time I have ever used it.
User avatar
Komebeaux
NSS Hall Of Fame Poster
 
Posts: 245
Joined: Dec 1, 2006 2:25 pm
Location: Martinsburg, WV
Name: Danny Cumbo
NSS #: 58430
  

Postby NZcaver » Dec 14, 2007 3:41 pm

Komebeaux wrote:I got a corded Dremel for Christmas years ago. It has two speeds, 'Holy S***! That's Fast!' and 'Stop'. I opened a coconut with it once. I think that's the only time I have ever used it.

Note to self - remember to bring rotary tool on tropical vacations. :rofl:
User avatar
NZcaver
Global Moderator
 
Posts: 6367
Joined: Sep 7, 2005 2:05 am
Location: Anchorage, Alaska
Name: Jansen
NSS #: 50665RL
  

Postby Komebeaux » Dec 14, 2007 3:46 pm

NZcaver wrote:
Komebeaux wrote:I got a corded Dremel for Christmas years ago. It has two speeds, 'Holy S***! That's Fast!' and 'Stop'. I opened a coconut with it once. I think that's the only time I have ever used it.

Note to self - remember to bring rotary tool on tropical vacations. :rofl:


Pretty sure Les Stroud done it that way.
User avatar
Komebeaux
NSS Hall Of Fame Poster
 
Posts: 245
Joined: Dec 1, 2006 2:25 pm
Location: Martinsburg, WV
Name: Danny Cumbo
NSS #: 58430
  

Postby NZcaver » Dec 14, 2007 4:01 pm

Komebeaux wrote:Pretty sure Les Stroud done it that way.

Actually, Les told me he just copies whatever Bear does.
User avatar
NZcaver
Global Moderator
 
Posts: 6367
Joined: Sep 7, 2005 2:05 am
Location: Anchorage, Alaska
Name: Jansen
NSS #: 50665RL
  

Postby JoeyS » Dec 14, 2007 4:05 pm

Hey Judy don't forget the safety eyewear. Don't wan't to spend Christmas morning in the ER like I did once (stabbed my own hand with new leatherman while trying to open another present).
________________
Joey Stuckey
JoeyS
NSS Hall Of Fame Poster
 
Posts: 402
Joined: Aug 8, 2006 11:22 am
Location: Middle Tennessee
NSS #: 57719
Primary Grotto Affiliation: Nashville Grotto
  

Postby Komebeaux » Dec 14, 2007 4:23 pm

NZcaver wrote:
Komebeaux wrote:Pretty sure Les Stroud done it that way.

Actually, Les told me he just copies whatever Bear does.


Only when Survivorman starts to suck, I'll know that's true.
User avatar
Komebeaux
NSS Hall Of Fame Poster
 
Posts: 245
Joined: Dec 1, 2006 2:25 pm
Location: Martinsburg, WV
Name: Danny Cumbo
NSS #: 58430
  

Re: Dremel tool question

Postby E-man » Apr 24, 2008 3:38 am

I know it has been a while since this post, but I thought it was worth adding to the thread. Most of the Dremel knock-offs are about the same. If you want a high quality tool that will last forever, get a fordom:
http://www.blackstoneind.com/foundation ... tegory=161
They are made for doing jewelry, stone carving, wood carving, etc. and they do all of it better than the dremel. You can find them for significantly less than the list price too. If you rarely use it, get a dremel.
Peace, Eli
Eli Ren - 52671
User avatar
E-man
Infrequent Poster
 
Posts: 15
Joined: Sep 6, 2007 10:09 am
Location: Seattle, WA
Name: Eli Ren
NSS #: 52671
Primary Grotto Affiliation: Cascade Grotto
  


Return to Equipment Forum

Who is online

Users browsing this forum: No registered users