8mm SS Hanger Question

Discuss vertical caving, equipment, & techniques. Also visit the NSS Vertical Section.

Moderator: Tim White

8mm SS Hanger Question

Postby DawgsgoCaving » Sep 8, 2015 10:07 am

What kind of hangers have y'all been using with petzl 8mm self-driving anchors? I can only find 8mm aluminum hangers and a few other varieties from different vendors. I can't seem to find a good stainless one. Anyone have any experience with this?
DawgsgoCaving
Prolific Poster
 
Posts: 165
Joined: Jan 8, 2014 6:59 pm
Name: Josh Schultz
NSS #: 65630RE
Primary Grotto Affiliation: CTG SCCi 3501
  

Re: 8mm SS Hanger Question

Postby Extremeophile » Sep 8, 2015 10:35 am

DawgsgoCaving wrote:What kind of hangers have y'all been using with petzl 8mm self-driving anchors? I can only find 8mm aluminum hangers and a few other varieties from different vendors. I can't seem to find a good stainless one. Anyone have any experience with this?

I generally only use self-drives for remote exploratory caving, and I just use the Petzl aluminum hangers. The self-drives are weaker in shear than many other options, and generally not suitable in tension (e.g. ceiling placements), and if left for an extended period they will corrode. The self-drive sleeves are usually plated steel, and you can use them with a 8 mm stainless bolt and standard SS hanger. These hangers usually have 10 mm (~3/8") holes, but I think they're fine to use with a hex-head bolt. If the placement is intended for repeated use over a longer period of time (e.g. more than a year), then I'd suggest using fully SS hardware and something with greater embedded depth (e.g. 3/8 x 3" wedge bolt), but the specific bolt and hanger type should be based on direction of pull and rock quality. It's still possible to hand drill these placements, it just takes a bit longer.
User avatar
Extremeophile
NSS Hall Of Fame Poster
 
Posts: 761
Joined: Dec 7, 2009 7:37 pm
Location: Littleton, CO
Name: Derek Bristol
NSS #: 34941
Primary Grotto Affiliation: Colorado Grotto
  

Re: 8mm SS Hanger Question

Postby DawgsgoCaving » Sep 8, 2015 3:38 pm

Thanks.
DawgsgoCaving
Prolific Poster
 
Posts: 165
Joined: Jan 8, 2014 6:59 pm
Name: Josh Schultz
NSS #: 65630RE
Primary Grotto Affiliation: CTG SCCi 3501
  

Re: 8mm SS Hanger Question

Postby snoboy » Sep 8, 2015 5:40 pm

Raumer makes 8mm hardware in SS, including sleeve anchors. They are however, not self drilling style - so require a separate drill.

https://starlessriver.com/shop/rigging_and_bolting

Available from Starless River in the UK, but I am not sure who does Raumer in the US. Their website says that Climb High is the distributor.

http://www.raumerclimbing.com/eng/rivenditori.asp
snoboy
Prolific Poster
 
Posts: 176
Joined: Apr 6, 2009 10:05 pm
Primary Grotto Affiliation: BC Speleological Federation
  


Return to On Rope!

Who is online

Users browsing this forum: No registered users

cron