7mm cordelette for making cows tail?

Discuss vertical caving, equipment, & techniques. Also visit the NSS Vertical Section.

Moderator: Tim White

Re: 7mm cordelette for making cows tail?

Postby SDcaver » May 8, 2013 7:59 pm

Yes- only one! It is easy to think two since there are two ends, but those two go to one single loop in the middle. One failure and you are going for a ride. Dave Merchant explains this in his Life on a Line 2, and shows how to tie a cowstail with two bottom loops.
SDcaver
Frequent Poster
 
Posts: 55
Joined: Feb 7, 2006 10:16 am
Location: South Dakota
Name: Marc Ohms
NSS #: 31288
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby hank moon » May 8, 2013 11:30 pm

More fodder:

http://www.speleocrasc.it/crasc02trilonge.htm

I don't know what it says yet, but looks interesting(ish). Bunch of colored spiky graphs and pictures of tied cowstails. How can you resist?

hank
User avatar
hank moon
NSS Hall Of Fame Poster
 
Posts: 610
Joined: Sep 7, 2005 9:52 am
Location: Salt Lake City
  

Re: 7mm cordelette for making cows tail?

Postby Extremeophile » May 9, 2013 10:03 am

SDcaver wrote:Yes- only one! It is easy to think two since there are two ends, but those two go to one single loop in the middle. One failure and you are going for a ride. Dave Merchant explains this in his Life on a Line 2, and shows how to tie a cowstail with two bottom loops.

Yes, one connection point, but isn't the loop where it connects to the D maillon roughly double the strength of either tail?

Having two connections to the D maillon doesn't change the fact that the D maillon itself is a single connection point, but I believe strength matters when you're considering the safety of one or two points of contact.
Last edited by Extremeophile on May 9, 2013 10:17 am, edited 1 time in total.
User avatar
Extremeophile
NSS Hall Of Fame Poster
 
Posts: 761
Joined: Dec 7, 2009 7:37 pm
Location: Littleton, CO
Name: Derek Bristol
NSS #: 34941
Primary Grotto Affiliation: Colorado Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Anonymous_Coward » May 9, 2013 10:14 am

This thread kind of makes me want to stop caving. Isn't there some kind of kill switch built in so we can put this one out of its misery? I vaguely recall that if we mention Hitler or spectra cowstails that maybe this will all just mercifully stop. Where's Ron Miller when you need him?
Andy Armstrong
American Carbide Council
User avatar
Anonymous_Coward
NSS Hall Of Fame Poster
 
Posts: 895
Joined: Feb 3, 2006 1:40 pm
Location: Inside the Beehive
NSS #: 45993RL FE
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Extremeophile » May 9, 2013 10:19 am

Anonymous_Coward wrote:This thread kind of makes me want to stop caving.

Maybe that was the point ... more virgin cave for the rest of us.
User avatar
Extremeophile
NSS Hall Of Fame Poster
 
Posts: 761
Joined: Dec 7, 2009 7:37 pm
Location: Littleton, CO
Name: Derek Bristol
NSS #: 34941
Primary Grotto Affiliation: Colorado Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Anonymous_Coward » May 9, 2013 10:37 am

At least now there is an understandable goal! Carry on...
Andy Armstrong
American Carbide Council
User avatar
Anonymous_Coward
NSS Hall Of Fame Poster
 
Posts: 895
Joined: Feb 3, 2006 1:40 pm
Location: Inside the Beehive
NSS #: 45993RL FE
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Extremeophile » May 9, 2013 10:46 am

Anonymous_Coward wrote:At least now there is an understandable goal! Carry on...

I guess it's like religion ... I know I have the one true cow's tail, and the rest of you are all going to hell. I feel some responsibility to save you all from this fate, but you don't seem to want to be saved.
User avatar
Extremeophile
NSS Hall Of Fame Poster
 
Posts: 761
Joined: Dec 7, 2009 7:37 pm
Location: Littleton, CO
Name: Derek Bristol
NSS #: 34941
Primary Grotto Affiliation: Colorado Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Anonymous_Coward » May 9, 2013 10:51 am

It's like they say, you can lead a horse to water, but you can't make him use a dynamic cowstail. :beatinghorse:
Andy Armstrong
American Carbide Council
User avatar
Anonymous_Coward
NSS Hall Of Fame Poster
 
Posts: 895
Joined: Feb 3, 2006 1:40 pm
Location: Inside the Beehive
NSS #: 45993RL FE
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby SDcaver » May 9, 2013 1:54 pm

My mistake I guess. I thought that this forum was for anyone to discuss caving topics- and specifically rope stuff in this section. I did not realize that the topic should appeal to everyone (or the "right" certain people apparently). I guess I did not know that you HAD to read every post as well, I assumed that if you did not want to read something you simply did not have to open the thread. Silly me....all this time I should have been posting on the threads that I chose not to read, telling the folks involved in the discussion that they were boring me and please move on. As cavers we only do so much, so naturally the same topics are going to pop up.
SDcaver
Frequent Poster
 
Posts: 55
Joined: Feb 7, 2006 10:16 am
Location: South Dakota
Name: Marc Ohms
NSS #: 31288
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Anonymous_Coward » May 9, 2013 2:17 pm

Geez Marc, relax! Why so uptight? I was only funnin'. :shrug:
Andy Armstrong
American Carbide Council
User avatar
Anonymous_Coward
NSS Hall Of Fame Poster
 
Posts: 895
Joined: Feb 3, 2006 1:40 pm
Location: Inside the Beehive
NSS #: 45993RL FE
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby NZcaver » May 9, 2013 4:21 pm

By definition, SINGLE Rope Technique means at least part of your system will only ever use one point of contact with no redundancy. Just sayin'.

I wouldn't personally use 7mm cordelette for cowstails. Or Spectra endorsed by Hitler. I prefer 9mm dynamic.
User avatar
NZcaver
Global Moderator
 
Posts: 6367
Joined: Sep 7, 2005 2:05 am
Location: Anchorage, Alaska
Name: Jansen
NSS #: 50665RL
  

Re: 7mm cordelette for making cows tail?

Postby Stan Allison » May 10, 2013 2:20 pm

I guess I don't understand why anyone would intentionally choose to use static cowstails instead of dynamic cowstails or argue so strongly for the use of static cowstails. Even the die-hard static cowstail proponents don't make the argument that static cowstails are better than dynamic cowstails, they just make the argument that static is good enough. Static is good enough most of the time, but there are situations where dynamic would be safer. I can't think of any situations where static would be safer.

I know that I shouldn't clip my cowstail into a bolt and climb above the bolt to the extent of the cowstail as that could cause a FF2 if I slipped. While I know that right now while warm and sitting in front of my computer, I know that when I'm cold, wet, tired and in water, I sometimes can do silly things. If I did that silly thing I would want to have a dynamic rope cowstail.

My question to all of the static rope cowstail proponents is what are the advantages of static rope cowstails over dynamic? If there aren't any advantages of static, why not use dynamic?

I hate to agree with Derek on this issue, but at least I feel good that I'm contributing to Andy not caving any more and leaving more virgin cave for me!!!
Stan Allison
Occasional Poster
 
Posts: 45
Joined: Jun 6, 2007 5:08 pm
  

Re: 7mm cordelette for making cows tail?

Postby LukeM » May 10, 2013 3:29 pm

Static rope is usually more durable, but I haven't seen that used as a reason yet. Usually when I see someone using something other than dynamic rope for a cowstail it's because they were too cheap to consider buying something other than what they have on hand or they just don't think much about the components of their vertical system and made the call independent of recommendations.

With that said, I use dynamic rope, and would recommend it to others. I base that on pretty much the same exact premise that Stan just laid out.
User avatar
LukeM
NSS Hall Of Fame Poster
 
Posts: 705
Joined: Jan 30, 2008 2:53 pm
Location: Albany, NY
Name: Luke Mazza
NSS #: 59317
Primary Grotto Affiliation: Syracuse University Outing Club
  

Re: 7mm cordelette for making cows tail?

Postby Anonymous_Coward » May 10, 2013 5:30 pm

FWIW, I use 9mm dynamic cowstails. In the past, I have used static cowstails and even (look away if you are squeamish) spectra slings as cowstails. I didn't really feel unsafe using any of this, and would use any of it again in the future if that's what I had available. It does seem that dynamic rope cowstails are "best", and that will continue to be my first choice if given one. When I was trying to be funny (remember, always a bad choice on cavechat) I just meant that the subject matter is tired, and has been rehashed many times. I did not mean to piss anyone off, especially Marc.
Andy Armstrong
American Carbide Council
User avatar
Anonymous_Coward
NSS Hall Of Fame Poster
 
Posts: 895
Joined: Feb 3, 2006 1:40 pm
Location: Inside the Beehive
NSS #: 45993RL FE
Primary Grotto Affiliation: Paha Sapa Grotto
  

Re: 7mm cordelette for making cows tail?

Postby Extremeophile » May 11, 2013 12:58 am

Anonymous_Coward wrote: I did not mean to piss anyone off, especially Marc.

I'm guessing hunting season must have just ended.
User avatar
Extremeophile
NSS Hall Of Fame Poster
 
Posts: 761
Joined: Dec 7, 2009 7:37 pm
Location: Littleton, CO
Name: Derek Bristol
NSS #: 34941
Primary Grotto Affiliation: Colorado Grotto
  

PreviousNext

Return to On Rope!

Who is online

Users browsing this forum: No registered users