Moderator: Tim White
Scott McCrea wrote:Previously on Cavechat: viewtopic.php?f=5&t=9719
trogman wrote:Then I noticed the sheet metal cover piece over the gap in the eye. Good quality racks should have a welded eye, or at least what is referred to as a "spun eye," which is looped around a couple of times.
snoboy wrote:trogman wrote:Then I noticed the sheet metal cover piece over the gap in the eye. Good quality racks should have a welded eye, or at least what is referred to as a "spun eye," which is looped around a couple of times.
Make sure you let Petzl know that!
chh wrote:NZ, where did you find your stainless bobbins? Most of the sites I just looked at that sell replacements don't give an option, or don't tell you what material they are made of. I didn't realize that you could buy stainless replacement parts.
snoboy wrote:I'm pretty sure the standard lower bobbin in a STOP is SS, and the upper is Alu, while both are Alu in the SIMPLE, AFAIK.
I don't think you can buy SS replacement bollards for the Simple, but you could probably make some if you have a machine shop.
Users browsing this forum: No registered users