Moderator: Moderators
Scott Shaw wrote:I use a set of small pliers, hold it tight and seat it firmly with a slight twist. Should hold. See if IMO has any of the Mike Lite tips left. They are stainless steel, never clog and will fit the old lamps. i have them in my Guys Dropper and AutoLite.
Phil Winkler wrote:Jim,
It could be too long. Have a good look at the tip seat/gas delivery tube. Only firm pressure is needed to seat it; not heavy pressure which is likely to distort the gas tube.
If so, I may have an Autolite you can have.
Phil Winkler wrote:Jim,
I found a small handful of tips. Some Premiere (I'm guessing) and the rest Justrite. Email an address and I'll put'em in the mail to you. I know I will never use them again as I gave away my lamps last year.
Users browsing this forum: No registered users