Headlamp Mods

[NWSurveyor]

I am planning to modify my Black Diamond Space Shot lamp.
http://www.moontrail.com/product.php?productid=1487
Since it runs off of 6 AA's or 9 volts, I was hoping to extend the power supply cord a few feet and install a connector to run off of a larger 9 volt system for more life or plugging in the AA for lighter weight. Anyone suggest a site (better than the Shack) that I can pick up electronic c supplies? Specifically matching the 3 wire bundled gray cord has been difficult locate. I have an email into Black Diamond...
Mike

[Mark620]

Mike,

They probably have the cord custom made. If you were to find it you would probably have to spend 100.00 or more on it.
a list of some surplus electronic sellers :http://www.arrickrobotics.com/surplus.html
Mouser.com
Newark.com
Digikey.com

Hope this helps.

Mark

I am planning to modify my Black Diamond Space Shot lamp.
http://www.moontrail.com/product.php?productid=1487
Since it runs off of 6 AA's or 9 volts, I was hoping to extend the power supply cord a few feet and install a connector to run off of a larger 9 volt system for more life or plugging in the AA for lighter weight. Anyone suggest a site (better than the Shack) that I can pick up electronic c supplies? Specifically matching the 3 wire bundled gray cord has been difficult locate. I have an email into Black Diamond...
Mike